📄 View Product Datasheet
📄 View Product SDS
| INTERNATIONAL CLASSIFICATIONS |
AWS/ASME A 5.9 ER 309L
EN 12072: W 23 12 L
| FEATURES & APPLICATIONS |
6309 Tig rod is an extremely low carbon stainless steel alloy with a ferrite content suitable for welding dissimilar steels. It is especially well suited for welding stainless steel pipe wherever a backing ring or a purge gas is required in order to provide impurity free weldments. This is necessary during stainless steel pipe welding in the chemical and petro-chemical industries.
- A special 309L Tig alloy coated with our unique Vari-Flow fluxing system.
- A very special Tig wire that eliminates the expense and wasted time associated with purging pipes with inert backing gasses.
- Easy to handle 18 inch (450mm) length works in multiple positions without having to bend the wire.
- Can be ordered in grade 308L as item number 6308.
- Any other grade of stainless can be manufactured in 100 pound (45kg) per diameter minimum quantities.
| All Weld Metal Analysis (Typical Weight %) |
Microstructure: Austenite with 3-9% ferrite. Typical ferrite number is 6.
Flux Color: Yellow
| C | Mn | Si | S | P | Cr | Ni | Mo | Cu | Fe |
| .015 | 1.9 | .4 | .01 | .02 | 23.2 | 13.8 | .1 | .08 | Bal. |
| Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Tensile Strength: 90,000 PSI (620 MPa)
Yield Strength: 66,000 PSI (420 MPa)
Elongation: 42%
Impact Energy: 40J: -157°F (-105°C)
Hardness: Brinell 209, Rockwell B96
| Welding Current & Instructions |
Recommended Current: DC Straight (-)
Recommended Amperage Settings:
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) |
| Minimum Amperage | 60 | 80 |
| Maximum Amperage | 100 | 120 |
Welding Techniques: Clean weld surface carefully to remove all scale and corrosion. Sections over 3mm should be beveled to permit complete penetration. Clean joint surface using a stainless steel brush. Use DC – (straight polarity), 2% thoriated tungsten electrode.
Welding Positions: Flat, Horizontal, Vertical up
Deposition Rates:
| Diameter (mm) | Length (mm) | Weldmetal/ Rods | Rods per lb (kg) of Weldmetal | Arc Time of Deposition min/lb (kg) | Amperage Setting | Recovery Rate |
| 3/32 (2.5) | 18″ (450) | 1.5oz (44g) | 10 (22) | 21 (46) | 80 | 100% |
| 1/8 (3.25) | 18″ (450) | 2.0oz (58g) | 8 (18) | 18 (40) | 100 | 100% |
| APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) |
| Length (mm) | 18″ (450) | 18″ (450) |
| Electrodes / lb | 14 | 10 |
| Electrodes / kg | 31 | 22 |