📄 View Product Datasheet
📄 View Product SDS
INTERNATIONAL CLASSIFICATIONS |
ANSI/AWS A5.14 ERNiCr-3
ASME SFA 5.14 ERNiCr-3
FEATURES & APPLICATIONS |
6082 is a nickel -chromium-iron filler metal used for TiG welding of nickel base Inconel® 600, 601 and 690 as well as Incoloy® 330, 800 and 800 HT to themselves or to carbon steel, stainless steel, high nickel base 200 and to nickel-copper Monel® 400. 6082 can also be used for joining high nickel base 200 to stainless steel, nickel-copper Monel® 400 to carbon steel and for overlaying on steel. Used for welding of ASTM B163, B166, B167 and also B168 having UNS N06600.
AWS Chemistry Requirements |
C | Mn | Fe | P | S | Si | Cu | Ni+Co |
.10 Max | 2.5 – 3.5 | 3.0 Max | .03 Max | .015 Max | .50 Max | .50 Max | 67 Min. |
Nb(Cb)+Ta | Co | Cr | Ti |
2.0 – 3.0 | .12 Max If Specified | 18.0-22.0 | .75 Max |
Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Tensile Strength 80,000 psi
Yield Strength 40,000 psi
Elongation 30%
Welding Procedures |
Typical GTAW (TiG) Welding Procedures: DCEN with EWTh-2 truncated conical tip
Filler Wire Size | Tungsten | Amps | Volts | Gas Cup Size | Argon (cfh) | Base Thickness |
1/16″ | 1/16″ | 80-150 | 12 | 1/2″ | 20 | 1/16″-1/8″ |
3/32″ | 3/32″ | 150-250 | 12 | 3/4″ | 25 | 1/8″-3/16″ |
1/8″ | 1/8″ | 200-375 | 12 | 5/8″ | 30 | 1/4″-1/2″ |
Procedures may vary with change in position, base metals, filler metals, equipment and other changes.
AVAILABLE SIZES: TN 82/ = Cut lengths of 030, 035, 045, 1/16, 3/32, 1/8, 5/32
Other sizes available – please inquire