View Product Datasheet
View Product SDS
INTERNATIONAL CLASSIFICATIONS |
ANSI/AWS A5.14 ERNiCr-3
ASME SFA 5.14 ERNiCr-3
FEATURES & APPLICATIONS |
6082 is a nickel -chromium-iron filler metal used for TiG welding of nickel base Inconel® 600, 601 and 690 as well as Incoloy® 330, 800 and 800 HT to themselves or to carbon steel, stainless steel, high nickel base 200 and to nickel-copper Monel® 400. 6082 can also be used for joining high nickel base 200 to stainless steel, nickel-copper Monel® 400 to carbon steel and for overlaying on steel. Used for welding of ASTM B163, B166, B167 and also B168 having UNS N06600.
AWS Chemistry Requirements |
C |
Mn |
Fe |
P |
S |
Si |
Cu |
Ni+Co |
.10 Max |
2.5 – 3.5 |
3.0 Max |
.03 Max |
.015 Max |
.50 Max |
.50 Max |
67 Min. |
Nb(Cb)+Ta |
Co |
Cr |
Ti |
2.0 – 3.0 |
.12 Max If Specified |
18.0-22.0 |
.75 Max |
Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Tensile Strength 80,000 psi
Yield Strength 40,000 psi
Elongation 30%
Welding Procedures |
Typical GTAW (TiG) Welding Procedures: DCEN with EWTh-2 truncated conical tip
Filler Wire Size |
Tungsten |
Amps |
Volts |
Gas Cup Size |
Argon (cfh) |
Base Thickness |
1/16″ |
1/16″ |
80-150 |
12 |
1/2″ |
20 |
1/16″-1/8″ |
3/32″ |
3/32″ |
150-250 |
12 |
3/4″ |
25 |
1/8″-3/16″ |
1/8″ |
1/8″ |
200-375 |
12 |
5/8″ |
30 |
1/4″-1/2″ |
Procedures may vary with change in position, base metals, filler metals, equipment and other changes.
AVAILABLE SIZES: TN 82/ = Cut lengths of 030, 035, 045, 1/16, 3/32, 1/8, 5/32
Other sizes available – please inquire