4910 – Nickel Base Grindable Cold Spray Powder

View Product Datasheet View Product Datasheet
View Product SDS View Product SDS


Our code 4910, is a Nickel base alloy powder having Chromium, Boron, and Silicon elements for hard wear resistance and also resistance to cavitation. It is used as a general purpose build-up powder and used as a corrosion resistant material.

Specially formulated “2 Step” metallizing powders for all low temperature powder spray torches

  • Special “inert gas atomized” powder for ultimate cleanliness.
  • Particle size distribution designed to eliminate fuming.
  • Designed to perform well through most applicators available.


Typical Properties

Nominal Chemistry

 Cr 10% , B 2.5% , Si 1.5% , Al 1.0% , Ni Balance

 Particle Size: -120+325 mesh (106+45um)

Melting Temperature: 1850°F (1010°C)

Coating Hardness: RC 32-39

Coating Density: 7.06 g/cc

Application: Worn-out or mis-machined parts, Soft bearing surfaces.

Code 4910 coatings can be finished by dry grinding with a toolpost grinder.