📄 View Product Datasheet
📄 View Product SDS
INTERNATIONAL CLASSIFICATIONS |
AWS: None
EN 14700 E Fe6
DIN 8555: E6-UM-60
FEATURES & APPLICATIONS |
Excellent for restoring worn hammers and assorted parts in rock crushing equipment.
- All position shock and abrasion resistant electrode.
- Excellent for overlaying in vertical and horizontal positions.
- Unusual ability to resist both shock and abrasion.
- Up to 10 pass build-ups without weld cracking.
- Welds pass over pass without chipping slag.
All Weld Metal Analysis (Typical Weight %) |
Microstructure: Martensite with some carbides.
Flux Color: Grey
C | Mn | Si | S | P | Cr | Mo | Ni | Fe |
.5 | .4 | 2.4 | .012 | .01 | 9.0 | .02 | .08 | bal |
Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Hardness: Rockwell C 56-57
Wear Co-efficient: 2.2%
Welding Current & Instructions |
Recommended Current: DC Reverse (+), or AC
Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
Minimum Amperage | 80 | 100 | 140 | 180 |
Maximum Amperage | 100 | 140 | 180 | 230 |
Welding Techniques: No preheat required. Remove all loose and foreign matter. Deposit stringer or weave beads using a short arc length.
Welding Positions: Flat, Horizontal, Vertical up
Deposition Rates:
Diameter (mm) | Length (mm) | Weldmetal/ Electrode | Electrodes per lb (kg) of Weldmetal | Arc Time of Deposition min/lb (kg) | Amperage Settings |
3/32 (2.5) | 14″ (350) | .39 oz (11g) | 41 (90) | 36 (79) | 90 |
1/8 (3.25) | 18″ (450) | .77 oz (22g) | 20 (44) | 21 (47) | 120 |
5/32 (4.0) | 18″ (450) | 1.33 oz (39g) | 12 (26) | 18 (39) | 160 |
3/16 (5.0) | 18″ (450) | 2.34 oz (65g) | 7 (15) | 13 (28) | 205 |
APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
Length (mm) | 14″ (350) | 18″ (450) | 18″ (450) | 18″ (450) |
Electrodes / lb | 21 | 9 | 6 | 5 |
Electrodes / kg | 46 | 21 | 14 | 11 |