📄 View Product Datasheet
📄 View Product SDS
INTERNATIONAL CLASSIFICATIONS |
AWS/ASME: NONE
DIN 8555: E6-UM-60-GP
FEATURES & APPLICATIONS |
General Hardfacing where some impact is combined with abrasion.
- Economical Hardfacing electrode for abrasion and moderate impact.
- The best Hardfacing electrode for low open circuit voltage AC welding machines.
- Spray transfer allows for smooth, uniform overlays.
- Hardness of RC 56-58 allows for good abrasion resistance along with moderate impact resistance.
- Also available as a special tubular MIG wire as Product code 7260.
All Weld Metal Analysis (Typical Weight %) |
Microstructure: In the as-deposited condition, the microstructure consists of martensite and some carbides.
Flux Color: Grey
C | Mn | Si | P | S | Cr | Ni | Mo | Fe |
.56 | .95 | .43 | .018 | .014 | 5.7 | .03 | .63 | Bal. |
Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Hardness Rockwell C56-58
Wear Co-efficient 2.8%
Welding Current & Instructions |
Recommended Current: DC Reverse (+), AC
Diameter (mm) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
Minimum Amperage | 100 | 150 | 200 |
Maximum Amperage | 130 | 190 | 260 |
Welding Techniques: Weld deposits are best applied using a weave technique. Full undiluted hardness is usually achieved after 2 to 3 passes.
Welding Positions: Flat, vertical up, vertical down, horizontal, overhead
Deposition Rates:
Diameter (mm) | Length (mm) | Weldmetal/ Electrode | Electrodes per lb (kg) of Weldmetal | Arc Time of Deposition min/lb (kg) | Amperage Settings | Recovery Rate |
1/8 (3.25) | 14″ (350) | .9 oz (26g) | 18 (39) | 23 (50) | 110 | 130% |
5/32 (4.0) | 14″ (350) | 2.5 oz (71g) | 6 (14) | 17 (37) | 165 | 130% |
3/16 (5.0) | 14″ (350) | 3.7 oz (105g) | 4 (9) | 13 (29) | 230 | 130% |
APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
Diameter (mm) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
Length (mm) | 14″ (450) | 14″ (450) | 14″ (450) |
Electrodes / lb | 12 | 8 | 6 |
Electrodes / kg | 26 | 18 | 13 |