📄 View Product Datasheet
📄 View Product SDS
| INTERNATIONAL CLASSIFICATION |
AWS/ASME: NONE
EN14700 E Fe15
DIN 8555: E10-UM-60-GRZ
| FEATURES & APPLICATIONS |
For protecting most iron base surfaces against severe abrasive wear and moderate impact.
- Chromium carbide electrode for economical smooth overlays.
- Ripple free surface doubles “grip resistance” to fine abrasive media.
- 3/32(2.5mm) and 1/8(3.2mm) provide position capability.
- Special formula totally eliminates the “Worm Tracking” type porosity common to this alloy group.
- Also available as a special tubular MIG wire as product code 7251.
| All Weld Metal Analysis (Typical Weight %) |
Microstructure: In the as-welded condition, the microstructure consists of an austenitic alloy matrix (bulk hardness RC57) and chromium/complex carbides (hardness RA 77).
Flux Color: Grey
| C | Ni | Mn | Cu | Si | S | P | Cr | Fe |
| 3.8 | .14 | .13 | .09 | .59 | .019 | .017 | 34 | Bal. |
| Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Hardness Rockwell C58-62
Vickers 670-700
Wear Co-efficient 2 %
| Welding Current & Instructions |
Recommended Current: DC Reverse (+) or AC
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
| Minimum Amperage | 65 | 110 | 160 | 210 |
| Maximum Amperage | 95 | 140 | 200 | 270 |
Welding Techniques: Use a stringer or wide weave technique. Deposit a maximum of 2 to 3 passes to achieve full hardness.
Welding Positions: Flat, Horizontal (smaller diameters can be used out of position)
Deposition Rates:
| Diameter (mm) | Length (mm) | Weldmetal/ Electrode | Electrodes per lb (kg) of Weldmetal | Arc Time of Deposition min/lb (kg) | Amperage Settings | Recovery Rate |
| 3/32 (2.5) | 14″ (350) | .76 oz (21g) | 21 (47) | 32 (71) | 80 | 180% |
| 1/8 (3.25) | 14″ (350) | 1.1 oz (31g) | 14 (30) | 23 (50) | 120 | 180% |
| 5/32 (4.0) | 14″ (350) | 2.7 oz (76g) | 6 (14) | 17 (37) | 175 | 180% |
| 3/16 (5.0) | 14″ (350) | 4 oz (112g) | 4 (9) | 13 (29) | 250 | 180% |
| APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
| Length (mm) | 14″ (350) | 14″ (350) | 14″ (350) | 14″ (350) |
| Electrodes / lb | 15 | 9 | 6 | 4 |
| Electrodes / kg | 33 | 20 | 13 | 9 |
View Product Datasheet
View Product SDS
| INTERNATIONAL CLASSIFICATION |
AWS/ASME: NONE
EN14700 E Fe15
DIN 8555: E10-UM-60-GRZ
| FEATURES & APPLICATIONS |
For protecting most iron base surfaces against severe abrasive wear and moderate impact.
- Chromium carbide electrode for economical smooth overlays.
- Ripple free surface doubles “grip resistance” to fine abrasive media.
- 3/32(2.5mm) and 1/8(3.2mm) provide position capability.
- Special formula totally eliminates the “Worm Tracking” type porosity common to this alloy group.
- Also available as a special tubular MIG wire as product code 7251.
| All Weld Metal Analysis (Typical Weight %) |
Microstructure: In the as-welded condition, the microstructure consists of an austenitic alloy matrix (bulk hardness RC57) and chromium/complex carbides (hardness RA 77).
Flux Color: Grey
| C | Ni | Mn | Cu | Si | S | P | Cr | Fe |
| 3.8 | .14 | .13 | .09 | .59 | .019 | .017 | 34 | Bal. |
| Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Hardness Rockwell C58-62
Vickers 670-700
Wear Co-efficient 2 %
| Welding Current & Instructions |
Recommended Current: DC Reverse (+) or AC
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
| Minimum Amperage | 65 | 110 | 160 | 210 |
| Maximum Amperage | 95 | 140 | 200 | 270 |
Welding Techniques: Use a stringer or wide weave technique. Deposit a maximum of 2 to 3 passes to achieve full hardness.
Welding Positions: Flat, Horizontal (smaller diameters can be used out of position)
Deposition Rates:
| Diameter (mm) | Length (mm) | Weldmetal/ Electrode | Electrodes per lb (kg) of Weldmetal | Arc Time of Deposition min/lb (kg) | Amperage Settings | Recovery Rate |
| 3/32 (2.5) | 14″ (350) | .76 oz (21g) | 21 (47) | 32 (71) | 80 | 180% |
| 1/8 (3.25) | 14″ (350) | 1.1 oz (31g) | 14 (30) | 23 (50) | 120 | 180% |
| 5/32 (4.0) | 14″ (350) | 2.7 oz (76g) | 6 (14) | 17 (37) | 175 | 180% |
| 3/16 (5.0) | 14″ (350) | 4 oz (112g) | 4 (9) | 13 (29) | 250 | 180% |
| APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
| Diameter (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) | 3/16 (5.0) |
| Length (mm) | 14″ (350) | 14″ (350) | 14″ (350) | 14″ (350) |
| Electrodes / lb | 15 | 9 | 6 | 4 |
| Electrodes / kg | 33 | 20 | 13 | 9 |