View Product Datasheet
View Product SDS
INTERNATIONAL CLASSIFICATIONS |
NONE APPLICABLE TO THIS PROPRIETARY PRODUCT
FEATURES & APPLICATIONS |
Ideally suited for difficult maintenance repairs. Easily welds steels that have been galvanized, painted, rusted, or otherwise contaminated in service. Misaligned parts or difficult to access areas are also easily remedied with this electrode.
- Adverse conditions mild steel electrode. Excels on rusty, greasy, poor fitting joints in all positions.
- Can weld through 1/2 inch (12mm) of surface contamination without porosity.
- Can bridge gaps as wide as 3/8 inch (9mm).
- Electrode can be bent without flux chipping.
- Slag can be welded over without removal.
All Weld Metal Analysis (Typical Weight %) |
Flux Color: Dark Brown
| C | Mo | Mn | Cr | Si | Ni | V | Fe |
| .09 | .30 | .59 | .20 | 1.00 | .30 | .06 | Bal. |
Typical Mechanical Properties |
Undiluted Weld Metal Maximum Value Up to:
Tensile Strength: 88,000psi (630 MPa)
Yield Strength: 80,000psi (570 MPa)
Elongation: 28%
Impact Energy 70J: -4°F (-20°C)
Welding Current & Instructions |
Recommended Current: DC Reverse (+), Straight (-), or AC
| Diameter (mm) |
3/32 (2.5) |
1/8 (3.25) |
5/32 (4.0) |
3/16 (5.0) |
| Minimum Amperage |
25 |
35 |
50 |
75 |
| Maximum Amperage |
75 |
125 |
160 |
200 |
Welding Techniques: Weld with a short-medium arc length at low amperage. When surface preparation is impractical, use a medium-long arc and favor high amperages. Multi-pass welds can be made without intermittent slag removal. Use any welding technique from stringer bead to wide weave.
Welding Positions: Flat, Vertical up, Vertical down, Horizontal, Overhead
Deposition Rates:
|
Diameter (mm) |
Length (mm) |
Weldmetal/ Electrode |
Electrodes per lb (kg) of Weldmetal |
Arc Time of Deposition min/lb (kg) |
Amperage Settings |
|
3/32 (2.5) |
14″ (350) |
.27oz (7g) |
45 (100) |
37 (81) |
50 |
|
1/8 (3.25) |
14″ (350) |
.56oz (15g) |
25 (56) |
25 (56) |
80 |
|
5/32 (4.0) |
14″ (350) |
.9oz (25g) |
17 (38) |
20 (45) |
105 |
|
3/16 (5.0) |
14″ (350) |
1.35oz (38g) |
12 (26) |
15 (34) |
140 |
APPROXIMATE ELECTRODE PACKAGING & DIMENSIONS |
| Diameter (mm) |
3/32 (2.5) |
1/8 (3.25) |
5/32 (4.0) |
3/16 (5.0) |
| Length (mm) |
14″ (350) |
14″ (350) |
14″ (350) |
14″ (350) |
| Electrodes / lb |
31 |
18 |
11 |
8 |
| Electrodes / kg |
68 |
40 |
24 |
18 |